LED Wall Washer LF2512

It uses high power RGBW 5-in-1 10W LEDs. It uses power switch, performs low weight and consumption, stable capability and long life. The built-in program includes dimmer, strobe, water, gradual change, fading and so on. International standard DMX 512 signal is requested.

Product Details

Features

Ø Light source: 25W LED with RGBAW 5in1 technology, low consumption, high brightness, stable capability and long life. Better light output and color mixing with special optical lens

Ø 16666 grades dimming. Flicker free

Ø 4-button DMX Address setting, LED display panel with ON/OFF function.

Ø Linear dim 0%-100%, Strobegradual changejumping change, etc.

Ø auto run /sound activated/master slave/interconnected multi-machine control

Ø using switching power supply to protect the LED to work well

Ø With built-in temperature detecting function, protect LED from overheat

Ø Degree lens:45º

Ø DMX channel optional

Technical Specification

 

● Input voltageAC 100V-264V/47-63HZ

● Output voltageDC36V

● Consume300W  

● Lamp TypeLED(25W)

● Lamp SpecRGBAW 5-in-1 LED12PCS

● LED span:50000~100000 hours

● Drive current: 500mA

● LED PWM dimming frequency>400Hz(16666 grades dimming)

● Control SignalDMX512/sound activity/auto-run

● Control modestand alone/ master and slave

● Channel: 4CH5CH9CH10CH

● Color effectRGBAW mixing

● Function effectdimming ,strobe ,eotic,gradual change

● Cooling modefan cooling

● Beam angle45º

● Anti-electricity intension1.5KV

● Insulation resistance:>2

● Size 986*136*235mm

● N.W.10.5Kg

 

Operating instruction:

MENUUP/DOWN+ENTER+UP/DOWN+ENTER

For example, choose DMX mode, operate as follows:

Ø Press MENU, go back to the initial setting

Ø Press UP / DOWN until Addr 

Ø Press ENTER to choose, the display will flash at this moment

Ø Press UP / DOWN to change the address code to select d001

Ø Press ENTER to confirm. DMX mode will be stored automatically and the screen will stop flashing.

For example, DMX channel choosing OperationCHNd mode

Ø Press Menu, go back to the initial setting

Ø Press UP/DOWNuntil shows “CHNd”

Ø Press ENTER to access the menu items to select, the screen will flash

Ø Press UP/DOWN to change the DMX Channel: 4CH5CH、 9CH and etc.

At last, press ENTER about 10s to confirm. DMX mode will be stored automatically and the screen will stop flashing.

 

For example, turn off the display panel:

Ø Press Menu, go back to the initial setting

Ø Press UP/DOWNuntil shows “LED”

Ø Press ENTER to access the menu items to select, the screen will flash

Ø Press UP/DOWN to choose “Off”

Ø At last, press ENTER to confirm and choose the working mode. The panel will auto closed if no operation for 20 seconds. Press any button to active it.

2. Details of built-in programsPr- -

Ø Press Menu, go back to the initial setting

Ø Press UP/DOWNuntil shows “pr--

Ø Press ENTER to access the menu items to select, the screen will flash

Ø Press UP/DOWN to change the built in program, like showspr00

At last, press ENTER to confirm. DMX mode will be stored automatically and the screen will stop flashing.

NotePr32--- Pr35 can change the content Of SPmodify the speed of jumping change , SP00 is the fastestSP15 is the slowest

Ø Pr00-Pr31RGBAW single color or multi color mixing

Ø Pr32RGBAW color jump

Ø Pr33RGBAW color jump + strobe

Ø Pr34multi color jump

Ø Pr35multi color jump + strobe

 



Inquiry